|
TABLE OF CONTENTS
|
SUBJECT
|
PAGE
|
LATIGOS/TIE STRAPS
|
|
LATIGO LEATHER LATIGO/TIE STRAP
|
9
|
NYLON LEATHER LATIGO/TIE STRAP
|
11
|
OFF BILLETS
|
|
LEATHER HALF-BREED LATIGO
|
15
|
NYLON HALF-BREED LATIGO
|
16
|
SINGLE PLY SKIRTING LEATHER OFF BILLET
|
17
|
DOUBLED AND STITCHED SKIRTING LEATHER OFF BILLET
|
19
|
LINED AND STITCHED SKIRTING LEATHER OFF BILLET
|
21
|
DOUBLED AND STITCHED NYLON OFF BILLET
|
23
|
|
EXAMPLE
|
LATIGO LEATHER LATIGO/TIE STRAP
HOW TO MAKE a basic single ply latigo leather latigo/tie strap as pictured at the left. This style consists of 1 main body and 1 latigo leather tie.
|
MATERIALS
Premium (No. 1 or A grade native hides and domestically tanned) latigo leather.
STANDARDS AND PRACTICES: It is recommended that leather latigos/tie straps should be made from 9/10 oz or heavier premium latigo leather for safety. Also, it is recommended that no latigos/tie should be used that are less than 1 ½" in width, with the exception of a pony saddle that is used on a small pony. If the pony saddle is to be used on a regular size horse, a standard latigo/tie strap should be used.
|
DIMENSIONS
The near side or on side latigo/tie strap is cut from 9/10 oz or heavier premium latigo leather at the desired width and length. The most common widths are 1 1/2", 1 3/4", and 2" with 1 3/4" the most popular. The length can be between 60" (5') to 72" (6') with 72 inches or six feet (6') the most common.
|
CONSTRUCTION AND ASSEMBLY PROCEDURE
The ends of the latigo/tie strap are finished to your preference ( see Figure 1 for two common examples ).
Once the ends are finished, the latigo/tie strap may be edged, edges rubbed and dyed at your option.
A latigo/tie strap that has been edged has a more comfortable feel for the rider when cinching up their saddle
|
The holes for the cinch buckle start at 21" from the tip, spaced 3" apart for 9 holes, and punched with the appropriate size round or oval punch with a #7 being a popular choice. The holes for the tie are in the shape of a triangle and spaced about 4" apart as shown in Figure 2. NOTE: There are some rigging configurations that will require the distance between the holes tor the tie to be increased.
|
The latigo/tie strap is attached to the rigging dee or plate with a 3/8" X 12" latigo tie with the most popular illustrated in Figures 3 and 4.
|
|
|